Hear Technologies OCTOHBH Hear Back OCTO Hub

Hear Technologies OCTOHBH Hear Back OCTO Hub

The modular Hub consists of four card slots, which can be populated with any configuration of input and/or output cards to fit your exact needs. Each Hub has the ability to supply signal and power to as many as 32 Mixers (8 per Network Card), each over a single standard CAT6* cable. With the built-in HBUS In/ Out ports, multiple Hubs can be daisy-chained together, allowing for truly unlimited system expansion.

Key Features

• Allows 32 channel digital input cards (e.g., Dante, Waves, MADI)
• Up to 32 input channels per Hub
• Multiple Hubs daisy-chain for up to 128 input channels
• Mix and match input types (ex. Dante and Analog)
• Six user-selectable sample rates indicated by LEDs: 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz and 192kHz
• Analog, Dante and AES/EBU goes up to 192kHz
• ADAT - goes up to 48kHz (SMUX not supported; ex. ADAT will down sample from 192kHz to 48kHz)
• Waves - goes up to 96kHz
• Less than .25 milliseconds total system delay (latency) from analog input to output
• 16 RGB LEDs intuitively display signal/peak levels for channel metering
• Standard CAT5e/6 cabling delivers power and signals to Mixers
• Daisy-chain via HBus for very large systems
• 1 RU chassis
• Modular I/O card-slot configurable mainframe
• Gigabit Ethernet network fabric
• 48V Power Over Ethernet supply

Technical Specifications

System Noise Performance
Noise, A-Weighted
-93 dBu @ 192 kHz sample rate
Dynamic Range
117 dB typical
System I/O
Hub Line In, Analog
8 balanced inputs on a DB-25 female (DA-88 pinout) per Analog Card
Hub Maximum Input Level, Analog
+8 dBu with analog card pad jumpers populated, +18 dBu with jumpers removed (up to +38dBu upon special request)
Hub HBus In, out
8-pin RJ45 jack (standard Ethernet pinout)
Hub USB Port
USB 2.0 (for firmware updates and editing configuration settings)
Hub Card Slots (4x)
Each slot can accept an analog or digital input card, output card, or 8 port Mixer network card
Mixer to Hub Connection
8-pin RJ45 jack (8x Mixer connections per network card)
Physical, Hub
Size
1.75” (44.5 mm) H x 19” (483 mm) W x 8.5” (216 mm) D
Unit Weight
6.3 lb. (2.8 kg)
Mounting
Standard rack mount, 1 RU
Power
Hub Power Requirements
48VDC, 150 Watts (each external power supply powers up to 16 Mixers) **
External Power Supply Requirements
Input Voltage
90VAC to 264VAC 50/60 Hz